Oregon Gas Power Cutters

Oregon concrete gas power cutters let you make deeper, cleaner and more accurate cuts, in less time.  Deeper cuts and square corners mean getting the job done with fewer steps. No more trying to match up cuts from both sides.  No more impact tools that risk damage to the surrounding concrete or masonry.  No more over-cutting corners.  The Oregon gas power cutter offers portability to you and your team.

680ES Series Gas Power Cutters – Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value. Easy to start with a new multifunction lever to control choke, run, and stop functions. The powerhead houses specially designed carburetion and ignition systems that work together for easy starting, cooler operation, and dependable performance at just about any elevation. Available with 12 in. (30 cm) and 14 in. (35 cm) guidebars and the entire line of FORCE3® Series diamond chain.

695XL Series Gas Power Cutters – The new 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower Oregon gas power cutter for frequent-use by general construction, utility contractors, and concrete professionals. Available with 12 in. (30 cm), 16 in. (40cm) guidebars and the entire line of FORCE4®, and PowerGrit® Series diamond chains. The 695XL-GC is available for 12 in. (30cm), 14 in. (35 cm) & 16 in. (40cm) FORCE3® diamond chains.

 

 

 

Categories: ,

Send us an Enquiry

Fill out the form below or call us on +91 (020) 2565 0472 or 2567 5507.

Description

Chain Saw 680ES-12 680ES-14
Engine Type 2-stroke, single cylinder, air cooled 2-stroke, single cylinder, air cooled
Displacement 4.7 cu in (76.5 cc) 4.7 cu in (76.5 cc)
Engine Speed Max 11,500 +/- 500 rpm (max) 11,500 +/- 500 rpm (max)
Engine Speed Idle 2,800 – 3,200 rpm 2,800 – 3,200 rpm
Fuel Mix Ratio 50:1 (2{8de3b760a3fe4d629ffee9ecc1d6a22091d25b8a2b828ef4fba227008eb6445c}) fuel-to-oil 50:1 (2{8de3b760a3fe4d629ffee9ecc1d6a22091d25b8a2b828ef4fba227008eb6445c}) fuel-to-oil
Fuel Capacity 0.23 gal (0.88 L) 0.23 gal (0.88 L)
Chainsaw
Power Type Gas Gas
Use Application Asphalt Asphalt
Brick Brick
Block Block
Concrete Concrete
Masonry Masonry
Stone Stone
Weight, Saw Only 21 lbs (9.6 kg) 21 lbs (9.6 kg)
Cutting Depth up to 12 in (30 cm) up to 14 in (35 cm)
Bar Length 12 in (30 cm) 14 in (35 cm)
Noise Level (Power) 117 dB(A), (Kwa=3.0 dB(A)) 117 dB(A), (Kwa=3.0 dB(A))
Chain Length 12 in (30 cm) 14 in (35 cm)
Noise Level (Pressure) 101 dB(A), (K=2.0 dB(A)) 101 dB(A), (K=2.0 dB(A))
Horsepower 5 hp (3.7 kW) 5 hp (3.7 kW)
Front Handle Vibration, ahv eq Concrete Cutting 7.2 m/s2 (K=1.0 m/s2) 7.2 m/s2 (K=1.0 m/s2)
Rear Handle Vibration, ahv eq Concrete Cutting 8.5 m/s2 (K=1.0 m/s2) 8.5 m/s2 (K=1.0 m/s2)
Water Supply (Min) 20 psi (1.4 bar) 20 psi (1.4 bar)
Water Flow Req (Min) 2 gpm (8 lpm) 2 gpm (8 lpm)

 

Chain Saw  695XL-12 GC 695XL-14 GC 695XL-16 GC
Engine Type 2-stroke, single cylinder, air cooled 2-stroke, single cylinder, air cooled 2-stroke, single cylinder, air cooled
Displacement 5.7 cu in (94 cc) 5.7 cu in (94 cc) 5.7 cu in (94 cc)
Engine Speed Max 9,300 +/- 150 rpm (max) 9,300 +/- 150 rpm (max) 9,300 +/- 150 rpm (max)
Engine Speed Idle 2,700 +/- 100 rpm 2,700 +/- 100 rpm 2,700 +/- 100 rpm
Fuel Mix Ratio 50:1 (2{8de3b760a3fe4d629ffee9ecc1d6a22091d25b8a2b828ef4fba227008eb6445c}) fuel-to-oil 50:1 (2{8de3b760a3fe4d629ffee9ecc1d6a22091d25b8a2b828ef4fba227008eb6445c}) fuel-to-oil 50:1 (2{8de3b760a3fe4d629ffee9ecc1d6a22091d25b8a2b828ef4fba227008eb6445c}) fuel-to-oil
Fuel Capacity 0.26 gal (1 L) 0.26 gal (1 L) 0.26 gal (1 L)
Chainsaw
Power Type Gas Gas Gas
Use Application Asphalt Asphalt Asphalt
Brick Brick Brick
Block Block Block
Concrete Concrete Concrete
Masonry Masonry Masonry
Stone Stone Stone
Weight, Saw Only 21 lbs (9.6 kg) 21 lbs (9.6 kg) 21 lbs (9.6 kg)
Cutting Depth up to 12 in (30 cm) up to 14 in (35 cm) up to 16 in (40 cm)
Bar Length 12 in (30 cm) 14 in (35 cm) 16 in (40 cm)
Noise Level (Power) 115 dB(A), (Kwa = 1.0 dB(A)) 115 dB(A), (Kwa = 1.0 dB(A)) 115 dB(A), (Kwa = 1.0 dB(A))
Chain Length 12 in (30 cm) 14 in (35 cm) 16 in (40 cm)
Noise Level (Pressure) 104 dB(A), (K=1.0 dB(A)) 104 dB(A), (K=1.0 dB(A)) 104 dB(A), (K=1.0 dB(A))
Horsepower 6.4 hp (4.8 kW) 6.4 hp (4.8 kW) 6.4 hp (4.8 kW)
Front Handle Vibration, ahv eq Concrete Cutting 3.6 m/s2 (K=0.2 m/s2) 3.6 m/s2 (K=0.2 m/s2) 3.6 m/s2 (K=0.2 m/s2)
Rear Handle Vibration, ahv eq Concrete Cutting 3.1 m/s2 (K=0.2 m/s2) 3.1 m/s2 (K=0.2 m/s2) 3.1 m/s2 (K=0.2 m/s2)
Front Handle Vibration, ahv eq Pipe Cutting 5.62 m/s2 (K=0.2 m/s2) 5.62 m/s2 (K=0.2 m/s2) 5.62 m/s2 (K=0.2 m/s2)
Rear Handle Vibration, ahv eq Pipe Cutting 5.28 m/s2 (K=0.2 m/s2) 5.28 m/s2 (K=0.2 m/s2) 5.28 m/s2 (K=0.2 m/s2)
Water Supply (Min) 20 psi (1.4 bar) 20 psi (1.4 bar) 20 psi (1.4 bar)
Water Flow Req (Min) 2 gpm (8 lpm) 2 gpm (8 lpm) 2 gpm (8 lpm)

Download Catalogues

OCON-680ES-DATASHEET-2023

OCON-695XL-DATASHEET-EN-2023

 

 

Reviews

There are no reviews yet.

Be the first to review “Oregon Gas Power Cutters”

Your email address will not be published. Required fields are marked *

Related products